06
1. Choose the “Bi-directional” in the “Adjustment main menu” as following figure.
Figure 5-9. Choose the Bi-d adjustment
2. Choose the “Print the Bi-d adjustment pattern” in the “Bi-Directional Adjustment
pattern” and click the “OK” button.
Figure 5-10. Bi-d adjustment pattern.
NOTE: As shown in the sample, gaps between passes are sometimes created in
different directions among patterns.
This unexpected change in direction is caused by an ink jet printer-
specific reason, which is an ink jet printer inevitably performs a
periodical cleaning specified by the flashing timer even during Bi-D
pattern printing, so that the printing direction suddenly changes.
B i - d
M S B l a c k
d a t a = - 2 d a t a = 0 d a t a = 2
M S C o l o r
d a t a = - 2 d a t a = 0 d a t a = 2
6 p l B l a c k
d a t a = - 2 d a t a = 0 d a t a = 2
6 p l C o l o r
d a t a = - 2 d a t a = 0 d a t a = 2
To Next Page
Loading...
