Epson 680Pro - LQ B/W Dot-matrix Printer - Printing Area

EPSON Stylus COLOR 680/777/777i Revision B
PRODUCT DESCRIPTION PAPER 26
1.5.3 Printing Area
1.5.3.1 Cut Sheet
See the figure below and tables on the right for printable areas.
Figure 1-6. Printable Area for Cut Sheet
* Bottom margin can be reduced to 3mm when paper dimension is
defined by using command, otherwise it is not reduced (14mm). As for
an area between 3mm and 14mm margin, printing quality may decline.
** Refer to 1.5.2 Paper Specification for PW (paper width) and PL
(paper length).
Printable Area
LM
RM
PW
TM
BM
PL
Table 1-13. Printing Area
Paper Size
Left Margin
(min.)
Right Margin
(min.)
Top Margin
(min.)
Bottom Margin
(min.)
A4 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *
Letter 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *
B5 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *
Legal 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *
Statement 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *
Exclusive 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”)
14 mm (0.54”) / 3mm
(0.12”) *