EPSON Stylus COLOR 680/777/777i Revision B
Disassembly and Assembly Disassembly 79
4.2.7 LD Roller removal
1. Remove the Housing from the printer. (Refer to Section 4.2.1.)
2. Take the Head FFC off from the Head FFC holder located along the LD roller
shaft holder.
Figure 4-20. Taking Head FFC out from the FFC holder
3. Remove two screws (C.B.S 3x6 F/Zn) securing the LD roller holder to the Main
frame.
Figure 4-21. Removing two screws securing the LD roller holder
Head FFC holder
LD roller shaft holder
C.B.S 3x6 F/Zn screws
To Next Page
Loading...
