13
4. If the present counter value is over 24200 points, we recommend you to replace
the Waste ink drain pad to new one.
[ Clear the protection counter value ]
1. Choose the “Clear the protection counter value” in the “Maintenance” menu and
click the “OK” button.
Figure 5-23. Choose the Clear the protection counter
2. By clicking the “OK” button, the following menu is displayed.
Figure 5-24. Clear the Protection counter
3. Click the “OK” button.When the “OK” button is clicked, the following message is
displayed. Click “Yes” button clears the counter in the EEPROM.
Figure 5-25. Warning message
C A U T I O N
n
Be sure to replace the installed waste ink pad with a new one after
or before you clear the current protection counter value.
To Next Page
Loading...
