EPSON Stylus COLOR 680/777/777i Revision B
Disassembly and Assembly Disassembly 82
2) Assemble the LD roller shaft holder unit while storing the
Paper return plate into the ASF frame.
Figure 4-27. LD Roller shaft holder assembling
procedure (2)
n
Fasten the LD roller shaft holder with two C.B.S 3x6 F/Zn
screws in the order indicated in the following figure.
Figure 4-28. Fastening the LD roller shaft holder
n
Tightening torque for screw
C.B.S 3x6 F/Zn screw for LD roller shaft holder unit : 9+/1 kgf.cm
Paper return plate
1
2
To Next Page
Loading...
