EPSON Stylus COLOR 680/777/777i Revision B
Disassembly and Assembly Disassembly 95
6. Lift up the left edge of the Front paper guide while slanting the Front paper guide
by pulling up its front edge, and then slide the Front paper guide to the left side
after releasing the right hook on the Front paper guide.
Figure 4-51. Remove the Front paper guide
7. Fit the protrusions of the Left PF roller bushing to the notches in the frames as
shown in the following figure and remove the PF roller fasten spacer with tweezer.
Figure 4-52.
Fit the protrusions of the Left PF roller bushing to each notches
8. Slide the Left PF roller bushing to right side as above figure Step 2.
Step1
Step1
Step2
Paper guide front
Left PF roller bushing
PF roller fasten spacer
1
2
To Next Page
Loading...
