EPSON AcuLaser C1900/AcuLaser C900 Revision B
Troubleshooting Status Display (AcuLaser C900) 143
3.3 Status Display (AcuLaser C900)
This section describes the outline of status/error display by the status monitor “EPSON
Printer Window !3”.
3.3.1 Service Call Error Status
At the occurrence of a service call error, the error code is displayed in “EPSON Printer
Window !3”.
Figure 3-1 below shows an image of the status monitor.
Figure 3-1. EPSON Printer Window !3 Display
NOTE:
The status No. is displayed at xxxx.
Listed below are service call errors of AL-C1900/AL-C900.
Engine Related
Table 3-2. List of Service Call Errors (Engine Related)
Error code Description Refer to
6004 Engine board error p.145
6005 Flash ROM error p.145
6008 Main motor error p.145
6011 Exhaust fan error p.146
6012 Power coolant fan error p.146
6014 Fuser cooling fan error p.146
6016 Polygon motor error p.146
6018 Laser error p.146
6020 Secondary transfer roller pressing/separation error p.147
6021 Transfer belt cleaner clearance error p.147
6022 Transfer belt rotation error p.147
6023 Developing rack rotation error p.148
6024 Fuser roller / warming up error p.148
6025 Fusing roller / low temperature error p.148
6026 Fusing roller / high temperature error p.149
6027 Fusing roller / thermistor error p.149
6033 Transparency detection sensor error p.149
6041 Memory counter error p.149
6042 Memory data error p.149
6043 Memory access error p.149
6044 Memory installation error p.149
6998 Engine communication error p.150