Epson AcuLaser C1900 - Front Door; Rear Cover; Upper Rear Cover

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Disassembly and Assembly Cover Removal 178
4.4.3 Front Door
1. Remove the Upper Front Cover. (p.177)
2. Remove the Front Door by pulling it off upward.
4.4.4 Rear Cover
1. Loose the screws of the Controller Board Protection Cover and then remove the
Protection Cover. (9 screws)
2. Remove the Rear Cover. (7 screws)
4.4.5 Upper Rear Cover
1. Remove the Top Cover. (p.177)
2. Remove the Rear Cover. (p.178)
3. Remove the Upper Rear Cover. (3 screws)
Figure 4-8. Front Door Removal
Figure 4-9. Removing the Rear Cover and Upper Rear Cover