Epson AcuLaser C2900N - Page 108

New Custom Size Portrait (Y)
11.7 inch* Specifies the length of the
custom size paper.
5.0-14.0 inches
Landscape (X)
8.3 inch* Specifies the width of the
custom size paper.
3.0-8.5 inches
*1
The default for Output Size varies depending on country-specific factory.
Note:
Selecting a custom size for the paper size prompts you to enter a custom length and width.
Orientation
Purpose:
To specify how text and graphics are oriented on the page.
Values:
Portrait*
Prints text and graphics parallel to the short edge of the paper.
Landscape
Prints text and graphics parallel to the long edge of the paper.
2-Sided
Purpose:
To specify whether to print on both sides of a sheet of paper.
Values:
2-Sided Print Off*
Does not print on both sides of a sheet of paper.
On
Prints on both sides of a sheet of paper.
Binding Edge Long Edge Flip*
Prints on both sides of a sheet of paper to be bound by long edge.
Short Edge Flip
Prints on both sides of a sheet of paper to be bound by short edge.
Font
Purpose:
To specify the default font from the fonts registered in the printer.
Epson AcuLaser C2900 Series User’s Guide
Using the Operator Panel Menus 108