Epson AcuLaser C2900N - Error Messages

Important:
When an error message is displayed, the print data remaining on the printer and the information
accumulated in the memory of the printer are not secured.
Message What You Can Do
Insert Fuser
010-317
Insert Fuser
Restart Printer
Turn off the printer and wait for 40 minutes. Open the front cover and make sure
that the fuser unit is fully installed.
Fuser Error
Restart Printer
Error 010-397
Restart Printer
Turn off the printer. Confirm that the fuser unit is correctly installed, and turn on
the printer. Contact customer support if this failure is repeated.
Certificate Fail
Contact Admin.
Error 016-404
Restart Printer
Contact your system administrator.
Certificate Fail
Contact Admin.
Error 016-405
Restart Printer
Epson AcuLaser C2900 Series User’s Guide
Troubleshooting 188