Epson AcuLaser C2900N - Entering Values

Entering Values
* Lattice pattern
Using the operator panel, enter the values found in the color registration chart to make adjustments.
1. Press the (Menu) button.
2. Select Admin Menu, and then press the
button.
3. Select Maintenance Mode, and then press the
button.
4. Select Adjust ColorRegi, and then press the
button.
5. Select Enter Number, and then press the
button.
6. Ensure that Enter (LY, LM, LC) appears.
7. Press the
or button to specify the values for LY, LM, and LC.
Note:
To move the cursor to the next value, press the
button.
8. Press the
button.
Epson AcuLaser C2900 Series User’s Guide
Troubleshooting 185