Problem Action
The printed result has light-induced
fatigue pattern.
Replace the drum cartridge if you have a spare cartridge.
See Also:
❏ “Replacing the Drum Cartridge” on page 210
❏ “Installing the Drum Cartridge” on page 212
If the problem persists, contact the Epson local representative office or an
authorised dealer.
Fog
Problem Action
The printed result is foggy. Replace the drum cartridge if you have a spare cartridge.
See Also:
❏ “Replacing the Drum Cartridge” on page 210
❏ “Installing the Drum Cartridge” on page 212
If the problem persists, contact the Epson local representative office or an
authorised dealer.
Bead-Carry-Out (BCO)
Epson AcuLaser C2900 Series User’s Guide
Troubleshooting 175