Epson AcuLaser C2900N - Print Quality Problems; The Output Is Too Light

Problem Action
Cannot print from the standard
250-sheet tray because the print media
in the tray is curled.
Load the print media into the SSF.
Print Quality Problems
Note:
In this section, some procedures use the operator panel or EpsonNet Config.
See Also:
❏ “Understanding the Printer Menus” on page 104
❏ “EpsonNet Config” on page 35
The Output Is Too Light
Epson AcuLaser C2900 Series User’s Guide
Troubleshooting 165