Epson AcuLaser C2900N - Setting the Power Saver Time Option; Resetting to Factory Defaults

3. Enter the password, and then press the button.
4. Select Secure Settings, and then press the
button.
5. Select Panel Lock, and then press the
button.
6. Select Panel Lock Set, and then press the
button.
7. Select Disable, and then press the
button.
8. Enter the current password, and then press the
button.
Setting the Power Saver Time Option
You can set the power saver time for the printer. The printer switches to the Power Saver mode after
the specified time.
1. Press the
(Menu) button.
2. Select Admin Menu, and then press the
button.
3. Select System Settings, and then press the
button.
4. Select Power Saver Time, and then press the
button.
5. Select Low Power Timer or Sleep Timer, and then press the
button.
6. Press the
or button or enter the desired value, and then press the button.
You can select from 3–60 minutes for Low Power Timer or 1–6 minutes for Sleep Timer.
7. To return to the previous screen, press the
(Back) button.
Resetting to Factory Defaults
After executing Initialize NVM and rebooting the printer, all the menu parameters or data are reset to
their default values.
1. Press the
(Menu) button.
Epson AcuLaser C2900 Series User’s Guide
Using the Operator Panel Menus 140