Values:
Disable*
Does not print on both sides of letterhead.
Enable
Prints on both sides of letterhead.
Low Toner Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
Does not show the alert message when the toner is low.
On*
Shows the alert message when the toner is low.
Maintenance Mode
Use the Maintenance Mode menu to initialize the NV (non-volatile) memory, configure the plain
paper quality adjustment settings, and configure the security settings.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
F/W Version
Purpose:
To confirm the current F/W version.
Adjust PaperType
Purpose:
To specify paper density settings.
Values:
Plain Lightweight
Heavyweight*
Labels Lightweight
Heavyweight*
Epson AcuLaser C2900 Series User’s Guide
Using the Operator Panel Menus 127
To Next Page
Loading...
