9. Ensure that Enter (RY, RM, RC) appears.
10. Press the
or button to specify the values for RY, RM, and RC.
Note:
To move the cursor to the next value, press the
button.
11. Press the
button.
12. Ensure that Enter (PY, PM, PC) appears.
13. Press the
or button to specify the values for PY, PM, and PC.
Note:
To move the cursor to the next value, press the
button.
14. Press the
button.
15. Select ColorRegi Chart, and then press the
button.
16. Ensure that Are You Sure? appears, and then press the
button.
The color registration chart is printed with the new values.
If the straightest line is not at the value of 0, adjust the values again. Checking the charts before and
after the adjustments will help you to determine the values to enter.
After printing the color registration chart, do not turn off the printer until the printer motor has
stopped running.
Note:
If 0 is not next to the straightest lines, determine the values and adjust the printer again.
Epson AcuLaser C2900 Series User’s Guide
Troubleshooting 186
To Next Page
Loading...
