Epson AcuLaser C2900N - Page 115

Values:
Auto*
Detects the Ethernet settings automatically.
10BASE-T Half
Uses 10BASE-T Half-duplex.
10BASE- T Full
Uses 10BASE-T Full-duplex.
100BASE- TX Half
Uses 100BASE-TX Half-duplex.
100BASE- TX Full
Uses 100BASE-TX Full-duplex.
1000BASE- T Full
Uses 1000BASE-T Full-duplex.
TCP/IP
Purpose:
To configure TCP/IP settings.
Values:
IP
Mode
Dual Stack*
Uses both IPv4 and IPv6 to set the IP address.
IPv4
Uses IPv4 to set the IP address.
IPv6
Uses IPv6 to set the IP address.
Epson AcuLaser C2900 Series User’s Guide
Using the Operator Panel Menus 115