Epson AcuLaser C2900N - Page 123

AutoClear Alert Off*
Does not emit a tone 5 seconds before the printer performs auto clear.
On
Emits a tone 5 seconds before the printer performs auto clear.
All Tones Off
Disables all the alert tones.
On*
Sets the volume of all the alert tones at once.
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
Values:
Millimeters (mm)*
Selects millimeter as the default measurement unit.
Inches (")
Selects inch as the default measurement unit.
Note:
The default for mm/inch varies depending on other settings, such as Country and Document Size.
DefaultPaperSize
Purpose:
To specify the default paper size.
Values:
A4 - 210x297
Letter - 8.5x11
Note:
The default for DefaultPaperSize varies depending on country-specific factory default.
Auto Job History
Purpose:
To automatically print a job history report after every 20 jobs.
Epson AcuLaser C2900 Series User’s Guide
Using the Operator Panel Menus 123