Epson AcuLaser C2900N - Page 28

Windows Vista/
Windows Vista x64
1. Click Start — Control Panel — Hardware and Sound — Printers.
2. Right-click the printer icon of the Epson AcuLaser C2900 Series and select
Properties.
3. Click the Options tab, and then click Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers folder.
Windows Server 2008/
Windows Server 2008 x64
1. Click Start — Control Panel — Printers.
2. Right-click the printer icon of the Epson AcuLaser C2900 Series and select
Properties.
3. Click the Options tab, and then click Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers folder.
Windows XP/
Windows XP x64/
Windows Server 2003/
Windows Server 2003 x64
1. Click Start (start for Windows XP) — Printers and Faxes.
2. Right-click the printer icon of the Epson AcuLaser C2900 Series and select
Properties.
3. Click the Options tab, and then click Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Printers and Faxes folder.
If the printer information is not updated automatically after clicking Get Information from Printer,
follow these steps:
1. Click the Options tab, and then select Duplexer in Items.
2. Select Available for the optional duplex unit setting in Duplexer.
3. Click Apply, and then click OK.
4. Close the Printers and Faxes (, Printers, or Devices and Printers) folder.
Epson AcuLaser C2900 Series User’s Guide
Basic Operation 28