Epson AcuLaser C2900N - Page 40

USB Connection
A local printer is directly connected to your computer using the USB cable. If your printer is connected
to a network instead of your computer, skip this section and go to “Network Connection” on
page 41.
To connect the printer to a computer:
1. Connect the smaller USB connector into the USB port on the rear of the printer.
Note:
Ensure that you match the USB symbol on the cable to the USB symbol on the printer.
2. Connect the other end of the cable into a USB port of the computer.
Note:
Do not connect the printer USB cable to the USB port available on the keyboard.
Epson AcuLaser C2900 Series User’s Guide
Network Basics 40