2. Adjust the paper guides.
Note:
Extend the rear side of the tray when you load Legal size paper.
3. Before loading the print media, flex the sheets and fan them. Straighten the edges of the stack on a
level surface.
4. Load the print media into the tray with the recommended print side facing up.
Note:
❏ Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.
❏ When loading coated paper, load coated paper one sheet at a time.
Epson AcuLaser C2900 Series User’s Guide
Printing Basics 74
To Next Page
Loading...
