Note:
If you do not load envelopes in the standard 250-sheet tray right after they have been removed from the
packaging, they may bulge. To avoid jams, flatten them as shown below before loading the envelopes in
the tray.
Com-10
Load the envelopes short edge feed with the flaps closed and the print side up. Ensure that the flaps
come at the right when you face towards the printer.
Monarch or DL
The Monarch or DL envelopes can be loaded in one of the following ways:
Epson AcuLaser C2900 Series User’s Guide
Printing Basics 76
To Next Page
Loading...
