2. Right-click the icon for your printer, and then select Printing Preferences.
3. Select the Advanced Settings tab, and then click Defaults.
4. Make selections on the driver tabs, and then click OK to save your selections.
Note:
For more information about Windows print driver options, click Help on the print driver tab to view the
online help.
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the driver settings before
sending the job to the printer. For example, if you want to use Photo print-quality mode for a
particular graphic, select this setting in the driver before printing that job.
The following procedure uses the PCL 6 driver as an example.
1. With the desired document or graphic open in your application, access the Print dialog box.
2. Select the printer and click Preferences to open the print driver.
3. Make selections on the driver tabs. See the following table for specific printing options.
Note:
In Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, Windows Server
2008 R2, and Windows 7, you can save current printing options with a distinctive name and apply
them to other print jobs. Select either the Paper / Output, Image Options, Layout, Watermarks /
Forms, or Advanced Settings tab, and then click Save on the Paper / Output tab. Click Help for
more information.
4. Click OK to save your selections.
5. Print the job.
See the following table for specific printing options:
The table shown below uses the PCL 6 driver as an example.
Epson AcuLaser C2900 Series User’s Guide
Printing Basics 90
To Next Page
Loading...
Need help?
General