Epson AcuLaser C3900N - Page 34

Items Settings (default in bold)/Description
PAPER
SOURCE
DEFAULT TRAY
TRAY1/TRAY2/TRAY3
*1
Select the setting for the default tray.
TRAY 1 PAPER SIZE
ANY, LETTER, LEGAL, EXECUTIVE, A4, A5, A6, B5(JIS), B6(JIS), GOVT
LETTER, STATEMENT, FOLIO, SP FOLIO, UK QUARTO, FOOLSCAP,
GOVT LEGAL, 16K, PHOTO 4×6
*2
, KAI 16, KAI 32, ENV C6, ENV DL, ENV
MONARCH, ENV CHOU#3, ENV CHOU#4, B5(ISO), ENV #10, JPOST,
JPOST-D, 8 1/8x13 1/4, 8 1/2x13 1/2, CUSTOM
Select the setting for the size of paper loaded into Tray 1.
CUSTOM
SIZE
*3
Specify the paper size when custom-sized paper is loaded into
Tray 1.
The setting units can be switched between millimeters and inches
with the SYS DEFAULT MENU/PAPER/UNIT OF MEASURE setting.
The setting range for WIDTH is 92 to 216 mm.
The default setting is 210 mm.
The setting range for LENGTH is 148 to 356 mm.
The default setting is 297 mm.
PAPER TYPE
ANY/PLAIN PAPER/RECYCLED/THICK 1/THICK 2/LABEL/
ENVELOPE/POSTCARD/LETTERHEAD/GLOSSY 1/GLOSSY 2/SGL
SIDE ONLY/SPECIAL PAPER
Select the setting for the type of paper loaded into Tray 1.
TRAY 2 PAPER SIZE
ANY/LETTER/EXECUTIVE/A4/A5/A6/B5(JIS)/B6(JIS)/GOVT LETTER/
STATEMENT/UK QUARTO/16K/PHOTO 4×6
*2
/KAI 16/KAI 32/
CUSTOM
Select the setting for the size of paper loaded into Tray 2.
CUSTOM
SIZE
*3
Specify the paper size when custom-sized paper is loaded into
Tray 2.
The setting units can be switched between millimeters and inches
with the SYS DEFAULT MENU/PAPER/UNIT OF MEASURE setting.
The setting range for WIDTH is 92 to 216 mm.
The default setting is 210 mm.
The setting range for LENGTH is 148 to 356 mm.
The default setting is 297 mm.
AcuLaser C3900 Series User’s Guide
Printer Control Panel and Configuration Menu 34