❏ For the maximum paper capacity for each paper source, see “Media Types” on page 60.
❏ Before loading envelopes, press them down to make sure that all air is removed, and make sure
that the folds of the flaps are firmly pressed; otherwise the envelopes may become wrinkled or a
media misfeed may occur.
❏ For envelopes with the flap along the long edge (Envelope C6, Envelope Monarch, and Envelope
DL), load the envelopes with the flap side up.
5. Slide the media guides against the edges of the paper.
6. Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE and PAPER TYPE in the configuration
menu, and then select the setting for the size and type of paper that are loaded. See also “PAPER
MENU” on page 33.
AcuLaser C3900 Series User’s Guide
Media Handling 72
To Next Page
Loading...
