Note:
Do not load above the d mark. Up to 500 sheets (80 g/m [22 lb]) of plain paper can be loaded into the
tray at one time.
5. Slide the media guides against the edges of the paper.
6. Close Tray 3.
7. Select PAPER MENU/PAPER SOURCE/TRAY 3/PAPER TYPE in the configuration menu, and then
select the setting for the type of paper that is loaded. See also “PAPER MENU” on page 33.
AcuLaser C3900 Series User’s Guide
Media Handling 77
To Next Page
Loading...
