Note:
Dispose of the used photoconductor unit according to your local regulations.
Do not burn the photoconductor unit.
8. Check the color of the new photoconductor unit to be installed.
Note:
In order to prevent toner from spilling, leave the photoconductor unit in the bag until step 7 is being
performed.
9. Remove the photoconductor unit from the bag.
10. Hold the photoconductor unit with both hands, and then shake it twice as shown in the
illustration.
Note:
Do not grab the bottom of the bag; otherwise, the photoconductor unit may be damaged, resulting in
decreased print quality.
AcuLaser C3900 Series User’s Guide
Replacing Consumables and Maintenance Parts 90
To Next Page
Loading...
