Epson BrightLink 1485Fi+ User Manual

163
Using Multiple Projectors (DuoLink)
You can combine the projected images from two or more projectors to create one large image
(BrightLink 1485Fi+). Follow the instructions in these sections to set up and project from multiple
projectors.
Note: Wait at least 30 minutes after you start projecting before adjusting the image.
Note: The interactive features are not available when connecting more than two projectors. See the
online Edge Blending Setup Guide (available only in English) for additional information.
Projector Identification System for Multiple Projector Control
Adjusting Color Uniformity
Blending the Image Edges
Matching the Image Colors
Adjusting the Black Level
Adjusting RGBCMY
Scaling an Image
Parent topic: Adjusting Projector Features
Projector Identification System for Multiple Projector Control
You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.
Setting the Projector ID
Setting the Remote Control ID
Parent topic: Using Multiple Projectors (DuoLink)
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press the Menu button.
2. Select the Multi-Projection (BrightLink 1485Fi+) or Installation (BrightLink 1480Fi+) menu and
press Enter.

Epson BrightLink 1485Fi+ Specifications

General

Display Technology	3LCD
Light Source	Laser
Contrast Ratio	2, 500, 000:1
Interactive	Yes
Built-in Speaker	Yes (16W)
Connectivity	HDMI, USB, VGA
Wireless Connectivity	Yes (Wi-Fi)
Lamp Life	20, 000 hours (Normal)
Projection Size	65" - 100"