217
Be sure to calibrate the pen before performing finger touch calibration.
If you notice positioning discrepancies after doing any of the following, calibrate again:
• Performing Geometry Correction
• Adjusting the image size
• Using the Image Shift feature
• Moving the projector
Note: When two projectors are connected and projecting interactive content (BrightLink 1485Fi+), draw
a line across the two screens after pen calibration and make sure the screens are aligned correctly. If the
line position does not match, realign the screens and perform calibration again.
Note: Move any pen you are not using away from the projection screen while calibrating.
Calibrating Automatically
Calibrating Manually
Parent topic: Using the Interactive Pens
Calibrating Automatically
You do not need the pens or a computer for Auto Calibration.
Note: You can start Auto Calibration by pressing the User button on the remote control or by pressing
the Menu button on the remote control as described here.
To Next Page
Loading...
