234
8. If your operating system supports these functions, you can also do the following:
• To zoom in or out, touch an item using two fingers and either move your fingers away from each
other (zoom in) or toward each other (zoom out).
• To rotate an image, touch the image with your fingers and rotate your hand.
• To drag up or down on a page, or move backward or forward in a browser window, use swiping
gestures or flicks.
Note: Finger touch operations may not work correctly with long or artificial nails, or fingers wearing
bandages. If your fingers are too close together or crossed, or your sleeve or free hand touches the
screen, finger touch may not be recognized. Some operating systems may not support gestures such as
flicks.
Parent topic: Using Finger Touch Interactivity
Related references
Pen and Touch Setup Settings - Pen/Touch Menu
Installation Settings - Installation Menu
Using BrightLink with a Computer
You can connect a computer to the projector and install the Easy Interactive Tools software from the
website. Make sure your computer is connected to the USB-B port on the projector or the control pad
(BrightLink 1485Fi+) with a USB cable. You can then do the following:
• Use the pens or your finger as a mouse to control your computer
• Use the Easy Interactive Tools software to annotate with both pens or a combination of pen and finger
touch at the same time
Note: A Touch Unit is optional for the BrightLink 1480Fi+ and must be installed for finger touch
operation.
Note: See the online Easy Interactive Tools Operation Guide for detailed information.
• Save and print your annotations
• Use the Tablet PC input panel in Windows 10, Windows 8.x, or Windows 7
• Use Ink Tools for annotation in Microsoft Office (2007 or later) applications
• Connect to a remote computer and control it with the interactive pens or your finger
To Next Page
Loading...
