Epson BrightLink 1485Fi+ - Using Interactive Features with Two Projectors (DuoLink)

268
1. Turn on the projector, if necessary.
2. Press the Home button on the remote control and select Screen Sharing on the Home screen.
3. Select the sharing option on the screen.
4. Enter the IP address of the projector you want to share your screen with and select Connect.
Note: You can also enter the projector keyword using the numeric keypad, if required, or select the
IP address of a projector you have previously connected to from the connection history list. The
projector keyword is displayed on the projected image of the receiving projector.
The projectors start connecting.
5. Enter the Projector Keyword if necessary.
When the connection is established, a connection status bar appears at the top of the distributing
projector's screen. Each receiving projector displays a message indicating that it cannot share the
image on the screen until the distributing projector selects an input source.
6. Repeat steps 4-5 to connect any remaining projectors.
7. Select the input source you want to display.
The projected screen is shared with the receiving projectors on their LAN input source.
8. To end screen sharing from the distributing projector, select the Stop Sharing icon in the status bar
at the top of the screen.
Note: To end screen sharing from the receiving projectors, select the Stop Sharing icon on the
toolbar.
You can also restrict drawing from receiving projectors. Press the Home button on the remote control
and select Screen Sharing. In the list of connected projectors, tap the projector you wish to restrict
drawing from and disable the drawing setting.
Parent topic: Sharing the Projected Screen
Using Interactive Features with Two Projectors (DuoLink)
You can use your projector's interactive features while projecting with two projectors installed side by
side (BrightLink 1485Fi+). If you're using a Mac, download and install the software from the website to
get started.
See the online Edge Blending Setup Guide (available only in English) for additional information.
Parent topic: Using the Interactive Features