Epson BrightLink 1485Fi+ - Adjusting the Pen Operation Area

235
• Annotate across two projectors (BrightLink 1485Fi+)
Adjusting the Pen Operation Area
Easy Interactive Tools
Parent topic: Using the Interactive Features
Adjusting the Pen Operation Area
If you connect a different computer or adjust the computer's resolution, the pen operation area is
adjusted automatically to match your mouse pointer position. If you notice that the pen position is
incorrect when using PC Interactive mode, you can adjust the pen area manually.
Note: Manual adjustment is not available when projecting from a LAN source.
Note: To perform manual pen area adjustment, the computer must be connected to the USB-B1 port on
the projector or the USB-B port on the projector control pad (BrightLink 1485Fi+).
1. Project your computer's desktop.
2. Press the Menu button, select the Pen/Touch menu, and press Enter.