211
• To switch to PC Interactive mode, switch to the input source for the connected computer or select
the PC Interactivity icon on the toolbar and make sure it is set to On if the
computer is already connected.
4. To show or hide the toolbar, select the icon.
Note: You can also show or hide the projector control toolbar by setting the Interactive > Display
Toolbars setting to Always Show or Hide for Set Time.
Parent topic: Interactive Modes
Related references
Interactive Settings - Interactive Menu
Controlling Computer Features from a Projected Screen (PC Interactive Mode)
You can navigate, select, and interact with your computer programs from the projected screen using the
interactive pens or your finger just as you would a mouse.
Note: A Touch Unit is optional for the BrightLink 1480Fi+ and must be installed for finger touch
operation. Mac users need to install the Easy Interactive Driver before using PC Interactive mode. Go to
epson.com.jm/support and select your projector.
1. Connect your computer to any available video input port on the projector other than a USB port.
2. Connect your computer to the projector's USB-B1 port.
Note: When using the control pad (BrightLink 1485Fi+), you need to connect your computer to the
control pad with an HDMI cable and a USB cable plugged in to the control pad's USB-B port. If you
are connecting over a network, you do not need a USB cable.
3. Turn on your projector and computer to project your computer screen.
To Next Page
Loading...
