Epson BrightLink 1485Fi+ - Selecting Background Templates; Inserting and Working with Images

245
Displays the next whiteboard page.
Adds a new whiteboard page after the current page. You can have up to 20 whiteboard
pages.
Follow these guidelines when using the whiteboard toolbar:
• You can display images of up to 2 files per page at 1920 × 1080 pixels on the whiteboard screen
(including images stored on the clipboard).
• To paste an image, you need to use the same pen that you used to cut or copy the image.
• Drawn objects are displayed at the front of the projected page.
• If objects or images are moved out of the projected screen, you may not be able to select them.
Parent topic: Whiteboard Mode
Selecting Background Templates
In whiteboard mode, you can insert horizontal or vertical lines, a graph-paper grid, or another
background template and place it on your whiteboard pages. You can select from 6 pre-installed
templates in 3 different colors.
1. In Whiteboard mode, select the icon to the left of the toolbar.
You see the available templates.
2. Select one of the template patterns or select to import an image.
Note: To import a template image, connect to a USB flash drive or a shared directory containing a
JPG or PNG file. The background image can be 1920 × 1080 pixels or smaller (smaller images will
not fill the page).
Parent topic: Whiteboard Mode
Inserting and Working With Images
In Whiteboard mode, you can use the Insert Image tool to insert an image from a USB flash drive or a
network folder. Images can be in .png or .jpg format, with a maximum size of 2048 × 2048 pixels. You
can also scan a document or image into a new page using a supported Epson all-in-one printer
connected to the same network or the projector control pad (BrightLink 1485Fi+). Once the image is
projected, you can move, resize, or rotate it.