EasyManua.ls Logo

Epson BrightLink 1485Fi+ - Restriction of Use; List of Safety Symbols (Corresponding to IEC60950-1 A2)

Epson BrightLink 1485Fi+
395 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
385
Remove the batteries from the interactive pens if you will not be using the pens for a long time.
Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in
fire, injury, or corrosion. When replacing batteries, take the following precautions: insert batteries so
that the polarities are correct; do not use batteries of different types or mix old and new batteries; do
not use any batteries other than those specified; if batteries leak, wipe away battery fluid with a soft
cloth; if battery fluid gets on your hands, wash them immediately; replace the batteries as soon as they
run out; remove the batteries if you will not be using the projector for a long period of time; do not
expose batteries to heat or flame and do not put them in water; dispose of used batteries according to
local regulations; keep batteries out of the reach of children. Batteries are choking hazards and are
very dangerous if swallowed.
Restriction of Use
Parent topic: Notices
Restriction of Use
When this product is used for applications requiring high reliability/safety such as transportation devices
related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or
functional/precision devices, you should use this product only after giving consideration to including fail-
safes and redundancies into your design to maintain safety and total system reliability.
Because this product was not intended for use in applications requiring extremely high reliability/safety
such as aerospace equipment, main communication equipment, nuclear power control equipment, or
medical equipment related to direct medical care, please make your own judgment on this product's
suitability after a full evaluation.
Parent topic: Important Safety Instructions
List of Safety Symbols (corresponding to IEC60950-1 A2)
The following table lists the meaning of the safety symbols labeled on the equipment.
No. Symbol Approved Standards Description
1 IEC60417
No.5007
"ON" (power)
To indicate connection to the mains.

Table of Contents

Related product manuals