249
2. Select the Interactive menu and press Enter.
3. Select Print and press Enter.
4. Select the following printing options as necessary:
• Printer lets you select either USB Printer or Network Printer as the printer connection.
Note: Selecting USB Printer will also enable scanning from Epson all-in-one printers. Only Epson
printers are supported via USB connection.
• Printer Address lets you enter an IP address for a printer connected to the same network as the
projector.
Note: You cannot use the following IP addresses: 127.x.x.x, 192.0.x.x, or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255). To return the IP address to its default value,
enter 0.0.0.0.
• Printer Type lets you manually select the printer type or let the projector automatically determine
the printer type (in most cases, you should leave this setting as Auto Detect).
To Next Page
Loading...
