283
Setting Options Description
Image Shift Varying positions available Adjusts the position of the
projected image
Connect ELPCB02 On
Off
Set to On to switch the input
source between the HDMI2 port
and HDMI3 port each time you
press the HDMI2 button on the
optional interface box
Touch Unit Installation Pattern
Power
Touch Unit Setup
Touch Calibration
Calibration Range
Installation Pattern: displays a
pattern to help you adjust the
position of the Touch Unit
Power: turns on the Touch Unit
power
Touch Unit Setup: performs
angle adjustment for laser
diffusion
Touch Calibration: performs
calibration for finger touch
operations
Calibration Range: if finger
touch operations are recognized
as drag operations, select Wide
to widen the calibration range
Remote Receiver Front/Rear
Front
Rear
Off
Limits reception of remote control
signals by the selected receiver;
Off turns off all receivers
Projector ID
(BrightLink 1480Fi+)
Off
1 through 9
Assigns an ID for the projector
when you use multiple projectors
To Next Page
Loading...
