311
Setting Options Description
Number of Projectors 2 to 4 Sets the number of projectors
used to create a unified image;
this setting is displayed only if
HDMI Out Setting is set to Pass
Through
Order 1 to 4 (when HDMI Out Setting
is set to Pass Through)
1 or 2 (when HDMI Out Setting
is set to Process Out)
Sets the projector's position in
numbered order from left to right
Connect Computer Yes
No
Set to Yes if you connected a
computer to the projector; this
setting is displayed only if HDMI
Out Setting is set to Process
Out
To Next Page
Loading...
