58
Setting Projector 1 Projector 2
Signal I/O Menu
EDID 3240 x 1080/60Hz 3240 x 1080/60Hz
Pen/Touch Menu
Installation of
Projectors > Sync of
Projectors
Wired Wired
Multi-Projection Menu
HDMI Out Setting Process Out Process Out
Order Specify the position of the projectors in number order from left to right
Connect Computer Yes No
Edge Blending >
select any edge >
Blend Start Position
0 0
Edge Blending >
select any edge >
Blend Range
600 600
Note: If you are using the projectors in the same room as another projector that does not support multi-
projector connections, set the Installation of Projectors > Infrared Intensity setting to Strong.
Non-interactive Setup (2-4 Projectors)
To Next Page
Loading...
