Maintaining Your Product 137
Cleaning Your Product
Cleaning the Exterior of the Product
To keep your product operating at its best, clean it by using the following procedure.
c
Caution:
n Wipe with the covers closed so that moisture does not enter the inside of the product. If the
inside becomes wet, there is a risk that the electrical circuits will short out.
n Do not use benzine, paint thinner, alcohol, or other volatile chemicals. There is a risk that
the inside or outside of the product may change properties or shape.
n Do not use a stiff brush. There is a risk of scratching the exterior of the product.
1. Make sure the product is turned off and all the lights are off, and then unplug the power cord
from the electrical outlet.
2. Use a soft, clean cloth to carefully remove any dust or dirt.
If the dirt does not come off, clean it using a soft, clean cloth dampened with a mild
detergent. Then, wipe the outside of the product dry with a dry, soft cloth.
Cleaning the Interior of the Product
If dirt or dust collects in the inside of this product or the stackers, or if dirt adheres to it, use a soft
cloth to wipe off the dirt.
Ink may sometimes stain stackers. Remove the stains by soaking a soft cloth in water or mild
detergent, wringing it out, and then wiping them off.
To Next Page
Loading...
