Product Information 183
Technical Specifications
Discs
c
Caution:
Writable/printable discs are 12 cm (4.72”) CD/DVD/BD discs. The 80 mm (3.15”) discs are not
supported.
Layer jump recording is not supported.
Note:
n Since the quality of any particular brand or type of disc may be changed by the manufacturer at
any time, Epson cannot attest to the quality of any brand or type of disc. Always test samples of
disc stock before purchasing large quantities or printing large jobs.
n Poor quality discs may reduce print quality and cause disc jams or other problems. If you
encounter problems, switch to a higher grade of disc.
n The specified disc is for ink jet printers.Thermal transfer discs are not supported.
n The specified disc has a moisture adhesive ink receptor layer on the label surface. If stored stacked,
especially under high humidity and high temperature conditions, discs may adhere to each other.
If an automatic duplication machine is used, please check the disc before using.
n Please treat the recording surface (blue green colored side) and printing surface carefully so they
do not have fingerprints, dirt, dust, water, or scratches. Dust and dirt on the recording surface
should be wiped gently with soft dry cloth, commercially available disc cleaner, or ethyl alcohol.
Do not use benzine, thinner, or antistatic material.
CD/DVD/BD:
*: When using BD-R XL, all drives must be BDE-PR1EP2 and Total Disc Maker Version 9.0 or later is required.
Notes for handling discs
Notes when using discs
n Do not touch recording surface when holding it.
Type CD-R/DVD-R 4.7GB/DVD+R 4.7GB/DVD-R DL 8.5GB/DVD+R DL 8.5GB/
BD-R/BD-R DL/BD-R XL 100* 100GB/BD-R XL 128* 128GB
Label side Printable
Glossy labels other than the specified disc type are not supported.
Specified disc CD-R, DVD-R, BD-R, BD-R XL
To Next Page
Loading...
