Troubleshooting 162
Horizontal Banding
n Make sure the printable side of the disc is face up in the stacker.
n Run the head cleaning utility to clear any clogged ink nozzles.
& See “Cleaning the Print Head” on page 132.
n Use ink cartridges within six months after opening the packages.
n Use genuine Epson ink cartridges.
n Check the H Ink light. If the light is on, replace the appropriate ink cartridge.
& See “Replacing an Ink Cartridge” on page 127.
n Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
& See “Publishing Discs” on page 24.
Vertical Misalignment
n Run the print head alignment utility.
& See “Aligning the Print Head” on page 135.
n Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
& See “Publishing Discs” on page 24.
Banding
n Make sure the printable side of the disc is face up in the stacker.
n Run the head cleaning utility to clear any clogged ink nozzles.
& See “Cleaning the Print Head” on page 132.
n Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
& See “Publishing Discs” on page 24.
n Due to the variation in the quality of discs, print results using the same type of discs from the
same data may not be the same.
To Next Page
Loading...
