Epson Disc producer PP-100III - Accessing EPSON Total Disc Maker; Registering Data

Publishing Discs 48
6. Close the disc cover.
c
Caution:
Before closing the disc cover, make sure that there is no disc left near stacker 3 and that discs in
stacker 3 are not slanted. Otherwise, an error may occur when you close the disc cover.
Accessing EPSON Total Disc Maker
After loading discs into the stacker, access EPSON Total Disc Maker by following the instructions
below to make settings for writing discs and create labels for the discs.
Click Start ( ), point to All Programs, click EPSON Total Disc Maker, and then click EPSON
Total Disc Maker.
To learn how to use EPSON Total Disc Maker, go to the Help menu.
Registering Data
The following instructions explain how to register data to be written on discs.
1. Start EPSON Total Disc Maker.