Using Your Software 15
*1: If using Windows 11, first apply KB5008215 before use.
*2: Make sure that the drive containing the work folder has about 1.5 times as much free space as the disc
to be created.
Note:
n ATI South Bridge chip set IPX460 or earlier is incompatible with the PP-100III.
n Intel 5 Series chip set or earlier is incompatible with this product.
n Refer to the URLs listed on pages “Help for Users in the United States and Canada” on page 170
and “Help for Users in the Europe (EMEA)” on page 170 for chip sets that are not supported.
n The product may not function properly where third party writing software is installed, anti-virus
software is installed, or another USB device is connected.
n You cannot use the product with remote desk top function or virtual environment.
n Only for the PP-100III/PP-50II:
n If your file system is FAT, you may not write to a DVD/BD.
n Use a CD/DVD drive that supports commands and operations compatible with MMC 4.0 or
higher and can read subchannel data as a source drive for copying.
n Use a BD drive that supports commands and operations compatible with MMC 5.0 or higher
and can read subchannel data as a source drive for copying.
n Only for the PP-100III: Use USB 3.0 standard compatible interface to ensure SuperSpeed USB
performance.
Screens and Procedures in This Guide
Depending on your model or environment, the screen shots used in this guide may differ from
the actual screens displayed. However, you can still use the same procedures described in this
guide.
Display XGA (1024 x 768 pixels) or higher
65,536 colors or more
Other Windows Media Player 6.4 or higher must be installed.
Only for the PP-100III/PP-50II: Creating music CDs requires a sound
device with an appropriate driver installed.
To Next Page
Loading...
