Using Your Software 21
Overview of Printer Driver
The printer driver lets you choose from a wide variety of settings to get the best printing results.
Note:
If the publish mode is set to "Standard Mode" and stacker 3 is set to “Use", printing from commercial
software is not possible.
Accessing the Printer Driver
You can access the printer driver from EPSON Total Disc Maker, EPSON Total Disc Setup, most
Windows-based applications, and the Windows Start menu.
If displayed from EPSON Total Disc Maker
The settings are only reflected in EPSON Total Disc Maker. The settings are lost when you exit
EPSON Total Disc Maker.
If displayed from EPSON Total Disc Setup or the Start menu
The information you set is saved as the printer driver settings, and after this, it is reflected in the
printer settings for EPSON Total Disc Maker and all other applications.
Refer to the following sections to access the printer driver.
From EPSON Total Disc Maker
1. Click Start ( ), point to All Programs, click EPSON Total Disc Maker, and then click
EPSON Total Disc Maker.
2. Select Print Settings from Tool menu.
From EPSON Total Disc Setup
1. Click Start ( ), point to All Programs, click EPSON Total Disc Maker, and then click
EPSON Total Disc Setup.
2. Select CD/DVD/BD Publisher, and then click Properties.
From Windows applications
1. Click Print or Print Setup in the File menu.
2. In the window that appears, click Printer, Setup, Options, Preferences, or Properties.
(Depending on your application, you may need to click one or a combination of these
buttons.)
To Next Page
Loading...
