Epson Disc producer PP-100III - Accessing EPSON Total Disc Maker; Registering Data (Only for PP-100 III)

Publishing Discs 62
11. If you select stacker 4 as the output stacker, unlock the lock lever located on stacker 4.
c
Caution:
Do not install stacker 3.
12. Close the disc cover.
Accessing EPSON Total Disc Maker
After loading discs into the stackers, access EPSON Total Disc Maker by following the instructions
below to make settings for writing discs (only for the PP-100III) and create labels for the discs.
Click Start ( ), point to All Programs, click EPSON Total Disc Maker, and then click EPSON
Total Disc Maker.
To learn how to use EPSON Total Disc Maker, go to the Help menu.
Registering Data (Only for PP-100III)
The following instructions explain how to register data to be written on discs.
1. Start EPSON Total Disc Maker.