Troubleshooting 155
EPSON Total Disc Monitor provides the following information:
n Job List:
You can check a list of jobs (up to 1000 for Unfinished Job and 50 for Finished Job) and its
information, and also you can cancel, pause, and restart unfinished jobs.
n Interface (only for the PP-100III):
USB 3.0 appears when the product is connected via USB 3.0 interface. USB 2.0 appears when
the product is connected via USB 2.0 interface.
n Operation Guidance:
This provides device status information. It also displays error messages as well as helpful tips
for better publishing.
n Ink Cartridge Status:
This provides a graphic display of the ink cartridge status.
Note:
Printable copies is an approximate value based on the number of labels that can be printed from
the present time when printing the same label as last time. This value may differ from the actual
value as a result of influences such as the printing data and printing environment. Up to 1000 is
indicated as “1000 or more discs,” and less than 1000 is indicated in increments of 10.
n Status of maintenance box and ink pad:
PP-100III/PP-100AP: Maintenance box free space is displayed.
PP-50II: Ink pad free space is displayed.
n Drive (only for the PP-100III/PP-50II), Printer, Stacker Status:
This provides a graphic display of the drives, printer, and stacker status. It also shows where
an error occurs.
To Next Page
Loading...
