Epson Disc producer PP-100III - Page 158

Troubleshooting 158
6. Plug the power cable into the wall outlet and turn on the product.
The printer tray automatically closes.
n For the PP-50II
1. Turn off the product and unplug the power cable from the wall outlet.
2. Remove 2 screws to open the rear printer cover.
3. Push the printer tray.
4. Open the disc cover, remove all the discs inside, and then close the disc cover.
5. Close the rear printer cover.
6. Plug the power cable into the wall outlet and turn on the product.
The printer tray automatically closes.
n For the PP-100AP
1. Turn off the product and unplug the power cable from the wall outlet.
2. Remove 2 screws to open the maintenance box cover.
3. Pull out the maintenance box.
c
Caution:
n Do not tilt the used maintenance box. Otherwise ink may leak.
n Do not touch the ink ejection port of the maintenance box or the inside of the box insertion
opening of the product.