Publishing Discs 26
If stacker 4 is selected as the output stacker, discs can be removed without stopping the product
while running a job.
Note:
This mode does not use stacker 3 if you select stacker 4 as the output stacker.
& See “External Output Mode (For PP-100III/PP-100AP)” on page 58.
Low-Volume Mode (for PP-50II)
This mode uses stacker 1 and 2 as the input stackers, and stacker 3 as the output stacker.
Different types of discs (CD, DVD, or BD) can be loaded into each of the 2 stackers and can create
different types of discs. This is ideal for creating small batches of discs at once.
If the same type of discs are loaded into stacker 1 and 2 and Auto is selected for the input stacker
setting, up to 100 discs can be continuously published by taking out published discs without
refilling discs.
Up to 1000 discs can be continuously published in a single job by refilling discs and taking out
published discs.
& See “Low-Volume Mode (For PP-50II)” on page 72.
Batch Mode (for PP-100III/PP-100AP)
This mode uses stacker 1 and 2 as the input stackers, and stacker 2 and 3 as the output stackers.
You can create up to 100 discs at once without refilling and taking out discs while publishing. Up
to 1000 discs can be continuously published in a single job by refilling discs and taking out
published discs. To use this mode, you need to place stacker 3 into the product.
& See “Batch Mode (For PP-100III/PP-100AP)” on page 85.
Read Back Mode (for PP-100III/PP-50II)
This mode uses stacker 1 as the input stacker, and stacker 2 as the output stacker.
Data in up to 50 discs in stacker 1 can be read at once. You can store the data in your
local/network HDD as files or a disc image file.
& See “Read Back Mode (For PP-100III)” on page 99 or “Read Back Mode (For PP-50II)” on page
109.
To Next Page
Loading...
