Publishing Discs 43
3. Set Stacker Settings.
n For the PP-100III
Publish Mode: Select Standard mode.
Stacker 1: Select the type of discs that you loaded into stacker 1.
Stacker 3: If you want to eject published discs to stacker 2 and error discs
to stacker 3, select Use.
If you want to eject published discs to stacker 2 and error discs
to stacker 4, select Do not use.
If you want to eject published discs to stacker 3, select Use.
If you want to eject published discs to stacker 4, select Do not
use.
n For the PP-100AP
Publish Mode: Select Standard mode.
Stacker 3: If you want to eject published discs to stacker 3, select Use.
If you want to eject published discs to stacker 4, select Do not
use.
To Next Page
Loading...
